Wirtgen introduce W 210 XF large milling machine
Innovative technology for maximum performance in wide range of challenging milling tasks
INTRODUCED in January 2025 and now available in the US, Europe, Australia, Japan, and Taiwan., the new Wirtgen W 210 XF large milling machine is well equipped for challenging milling tasks and can handle a broad spectrum of applications, from surface layer rehabilitation and full-depth pavement removal to fine milling.
Thanks to its high daily output, the W 210 XF is well suited to motorways, arterial roads, airport runways, and other major projects, with its Mill Assist machine control system ensuring absolute efficiency on every construction site. In automatic mode, the system always ensures the most favourable working balance between performance and costs. It also allows the selection of three different working strategies that optimize the process in terms of cost, performance, or quality.
Powered by a John Deere engine with a maximum rated power output of 580kW, the W 210 XF delivers powerful and efficient milling performance in every situation. Wirtgen and John Deere worked in close collaboration on fine-tuning the engine’s torque characteristic to meet the specific needs of cold milling applications.
The combination of the powerful engine and the Dual Shift two-speed powershift transmission permits a wide range of milling drum speeds. The lower range of milling drum speeds allows significant reductions in fuel consumption, pick wear, and noise emissions. The upper range of milling drum speeds makes it possible to achieve high area performance with a high-quality milling pattern, even at the maximum milling depth of 330mm. This means that the W 210 XF is well equipped to realize even the most demanding milling tasks with maximum sustainability.
Requirements on construction sites frequently change from one day to another. This means that extreme flexibility is decisive. An example of this in the case of the W 210 XF is that the milling drum can be exchanged for a multiple cutting system (MCS) milling drum in just a few minutes.
The ability to rapidly exchange application-specific milling drums with different tool spacings increases machine productivity. At the same time, the choice of the ideal milling drum for a specific application also reduces wear-related costs. Wirtgen offer a range of milling drums for the W 210 XF to meet the requirements of any milling application.
The quick-change milling drum assembly allows the use of milling widths of 2.0m, 2.2m or 2.5m. With the aid of the quick-change system, the entire milling drum housing can be exchanged in less than an hour.
Wirtgen Group Performance Tracker Milling (WPT Milling) provides automated documentation of milling tasks. The operator is kept constantly informed about the current machine and job parameters, and when the work has been completed, the data are transmitted to the machine owner, who can use it for fast and precise invoicing.
In addition to displaying construction site and machine data, the automated documentation also shows the CO2 emissions for the entire construction site. The John Deere Operations Centre presents all information in real time.
The Level Pro levelling system was developed by Wirtgen specifically for cold milling machines. Clearly readable control panels provide information and measured values from all currently connected sensors and reduce the machine operator’s workload. The system is fully integrated in the control system of the cold milling machines and, as essential machine functions are directly interconnected, enables a high level of automation and precise milling results.
The system also offers many automatic and additional functions that make the machine operator’s job easier, eg automatic lifting for driving over manhole covers.
