Agg-Net

The Aggregates & Recycling Information Network
Mobile Menu
From the organisers of
 

2020 / 2021 Edition

Order your copy here

Upgraded call points from E2S Warning Signals

Manual call points from E2S Warning Signals

Extensive range of manual call points (MCPs) further improved with new features and additions

E2S Warning Signals manufacture an extensive range of manual call points (MCPs) designed to be installed in hazardous areas, primarily for the control of fire and gas alarm systems etc.

They are available in different enclosure materials – STEx in 316L stainless steel for use in the harshest of environments; GNEx in anti-static, UV-stable corrosion proof GRP; and BEx in corrosion proof marine-grade copper-free LM6 (A413) aluminum with a chromated and powder-coated finish – and with a choice of four operating mechanisms, so specifiers can choose the most suitable enclosure for their installation location and operating environment.

The four operating mechanism are: traditional break-glass with a lifting protective flap, to minimize accidental operation, and a safety membrane to ensure that no glass fragments are released during activation; a push-button, where the operating mechanism is again protected by a latching lift flap and a tool is required to reset the unit after operation; a momentary action push-button unit; and a dual-action push-button, which requires the operating mechanism to be twisted through 90° and then pushed to activate.

All versions are SIL2 compliant to IEC 61508 (2010). To reduce installation time and cost, there are dual cable entries in the top and another in the side of the enclosure. The backbox can be rotated through 180° to position the entries in the required direction. Two M20 stopping plugs, user-definable in brass, stainless steel or nickel-plated brass, are supplied as standard, and 1/2in and 3/4in NPT and M25 adaptors are also available.

The latest updates include the BExCP3C and GNExCP6C call points, now with extended approval  temperatures and a wider range of EOL and series resistor values, approved to IECEx and ATEX standards with additional PESO, INMETRO and Ex EAC approvals.

The GNExCP7 Ex d units are globally approved to IECEx, ATEX, UL and cUL standard for all Zone 1, 2, 21 and 22 and Class I/II Div 2 installations with a variant approved to UL 38, Manual Signaling Boxes for Fire Alarm Systems, and ULC-S528, Manual Stations for Fire Alarm Systems.

The flameproof STExCP8 is ATEX and IECEx approved for Zone 1 and 2 and also carries DNV type approval for exposed locations. For installation outside hazardous areas, IP66/IP67 weatherproof WP3, WP6 and WP7 call points units are now available.

Share this page

Add new comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.