New adjustable depth bearing temperature sensors
4B’s adjustable depth bearing (ADB) temperature sensors have been designed to allow the depth of the probe to be adjustable depending on the application.
The ADB series is available with three standard probe lengths of 50mm, 100mm and 200mm, and screw directly into a bearing housing through the existing grease zerk thread. There is no need to remove the sensor for bearing lubrication since each sensor is fitted with its own grease zerk.
The ADB series has NTC-type thermistors that allow continuous temperature monitoring. They can be connected to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite or Watchdog Elite.
The new sensors have been approved for use in hazardous areas according to ATEX, CSA and IECEx.
4B Braime Elevator Components, Hunslet Road, Leeds LS10 1JZ; tel: (0113) 246 1800; fax: (0113) 243 5021.
The ADB series is available with three standard probe lengths of 50mm, 100mm and 200mm, and screw directly into a bearing housing through the existing grease zerk thread. There is no need to remove the sensor for bearing lubrication since each sensor is fitted with its own grease zerk.
The ADB series has NTC-type thermistors that allow continuous temperature monitoring. They can be connected to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite or Watchdog Elite.
The new sensors have been approved for use in hazardous areas according to ATEX, CSA and IECEx.
4B Braime Elevator Components, Hunslet Road, Leeds LS10 1JZ; tel: (0113) 246 1800; fax: (0113) 243 5021.
