New range of compact digital pressure gauges
A range of low-cost, battery-powered digital pressure gauges has been launched by Impress Sensors & Systems, which offers customers a direct, cost-effective replacement for their existing, less accurate mechanical gauges.
The DM 10 range of battery-powered digital pressure gauges are targeted at a wide range of applications, including hydraulics and pneumatics, process engineering, research and development/laboratory work, and mobile pressure monitoring, including mobile construction vehicles, tractors, pumps, compressors and filters. The gauges have a ceramic diaphragm and are therefore also suitable for environments in which aggressive chemicals are present.
The DM 10 has a 63mm diameter display, the same as common mechanical gauges, but is said to offer higher accuracy, repeatability and reliability.
The DM 10 is designed to be mounted easily and quickly in-situ. The 4.5-digit, seven-segment LC display can be rotated independently of the housing, providing the engineer with clear sight of the display at all times, regardless of the mounting configuration. The housing itself rotates 270 degrees about the horizontal axis.
The device is operated through a simple, menu-driven display via push buttons on a touchpad. As well as showing information about the nominal pressure range, the unit can display via the menu the maximum and minimum pressures of a process.
Users can also choose which units of measurement they prefer, including bar, mbar, psi, mH2O and MPa. Additional functions include auto-zero and an automatic switch-off, where the user can define between one and five minutes or select continuous operation.
Nominal pressure ranges for the DM 10 are 1.6-250 bar. Minimum operational life of the battery is 1,500h.
For more information on the DM 10 range tel: 0118 981 7980 or contact Impress Sensors & Systems via the form below
The DM 10 range of battery-powered digital pressure gauges are targeted at a wide range of applications, including hydraulics and pneumatics, process engineering, research and development/laboratory work, and mobile pressure monitoring, including mobile construction vehicles, tractors, pumps, compressors and filters. The gauges have a ceramic diaphragm and are therefore also suitable for environments in which aggressive chemicals are present.
The DM 10 has a 63mm diameter display, the same as common mechanical gauges, but is said to offer higher accuracy, repeatability and reliability.
The DM 10 is designed to be mounted easily and quickly in-situ. The 4.5-digit, seven-segment LC display can be rotated independently of the housing, providing the engineer with clear sight of the display at all times, regardless of the mounting configuration. The housing itself rotates 270 degrees about the horizontal axis.
The device is operated through a simple, menu-driven display via push buttons on a touchpad. As well as showing information about the nominal pressure range, the unit can display via the menu the maximum and minimum pressures of a process.
Users can also choose which units of measurement they prefer, including bar, mbar, psi, mH2O and MPa. Additional functions include auto-zero and an automatic switch-off, where the user can define between one and five minutes or select continuous operation.
Nominal pressure ranges for the DM 10 are 1.6-250 bar. Minimum operational life of the battery is 1,500h.
For more information on the DM 10 range tel: 0118 981 7980 or contact Impress Sensors & Systems via the form below
