From the
organisers of
Hillhead logo

New easy-to-use MIG welding packages

Weldability-Sif MIG welders

Weldability-Sif introduce new ‘ready-to-weld’ welding packages

The MIG 130T, MIG 160T and MIG 200E are new ‘ready-to-weld’ DC single-phase 230V MIG welding packages that, according to Weldability-Sif, are portable, robust, easy to set up and operate. 

All three machines feature high-efficiency fan-on-demand cooling and thermostatic protection, a primary cable with a three-pin plug; whilst the output and wire feed speeds are controlled by a single-knob potentiometer.

 

The MIG 130T is rated 130A at 15% duty cycle and has 0.6mm/0.8mm V groove wire feed rolls and can be used with either 0.6mm or 0.8mm solid and 0.8mm diameter flux-cored mild steel, 5kg reel, MIG welding wires using a current range from 40-140A. Heat settings are adjusted via a four-step voltage switch, whilst a gas regulator kit is available as an option.

The MIG 160T is rated 160A at 10% duty cycle and has 0.6mm/0.8mm V groove wire feed rolls and can be used with either 0.6mm or 0.8mm solid and 0.8mm diameter flux cored mild steel, 5kg reel, MIG welding wires using a current range from 40-160A. Heat settings are adjusted via a four-step voltage switch, whilst a gas regulator kit is available as an option.

The MIG 200E is supplied with a Euro connection for MIG welding torches, a 3m WB15 Euro-style MIG welding torch, earth clamp, industrial regulator, 0.8mm/1.00mm wire feed rollers, uses 15kg solid wire MIG welding reels, and has an industrial gas cylinder support at the rear.

It is rated 200A at 15% duty cycle and is designed for professional welders. With a current range of 40-200A, it can be used with 0.6mm to 1.0mm diameter solid mild steel MIG welding wire. Heat settings are adjusted via a six-step voltage switch.

Other features include adjustable burn back and a spot weld timer, 0.6mm/0.8mm V-groove wire feed rolls for flux-cored wire welding, and reversible polarity for gas and flux-cored wire welding applications.

 

Latest Jobs